Boating Neoprene Wetsuit

Boating Neoprene Wetsuit

Hello everyone! So. An overview of wetsuits from various leading manufacturers is offered for consideration to all those who are suffering and lovers of open water.

The review is by no means exhaustive and authoritarian - just a modest attempt to summarize, without going into a special jungle, what's what and for what, and, most importantly, how much opium is for the people, as they say.

Careful step-by-step reading of this marvelous epic will completely avoid many questions about choosing, purchasing and caring for your first or not the first hydrak. Let's get started.

How does a wetsuit work or What is it for ?!

Keeping warm

- from English. etsuit – wet/wet suit. Yes, friends - it gets wet! This is the first thing. Water enters through the back seam mainly. Water forms a thin film of a couple of millimeters, evenly spreading between the surface of our skin and the material of the wetsuit (neoprene), which “closes” it there and prevents it from going out.

Then our body quickly heats up that penetrated water (because it is not difficult to heat up tightly trapped 1-2 mm of water at, say, 14-16 degrees for our large 36.6-degree body) and we are warm ... Well, in general, a wetsuit, if not completely prevent, then significantly delay the onset of hypothermia. This is in a nutshell.

Speed ​​

In addition to heating us, the wetsuit has another function - to make us faster! The hydrodynamics are definitely improving.

This is achieved due to the streamlining that it gives to our body and the compression of our muscles (the drag coefficient decreases), as well as due to better buoyancy when we are wearing it.

A wetsuit is an essential part of any kiter's wardrobe. They are different: long, short, with a thickness of 0.5 to 6 mm, but we will focus on the most relevant, long wetsuit. So how to choose it, what you need to know and what features to take into account? Let's try to put everything on the shelves :)

WETSUIT TYPES

Dry. A jumpsuit with sealed cuffs on the sleeves and legs (there are also not only cuffs on the legs, but also socks) that do not allow water to pass through. This option is chosen by those who ride in harsh conditions.

Wet. Most wetsuits are just like that, as they are not airtight, unlike dry ones. You can also come across such a term as semi-dry - this is a marketing name, there is no clear criterion for the amount of water that it passes through. So, the bulk of wetsuits are wet, i.e. water gets into the wetsuit. In order not to freeze in such a wetsuit, the following points must be taken into account: the correct size, processing of seams, elasticity of neoprene, how the zipper is made, and where it is located, since the less water gets inside, the less it will circulate there, and therefore you will be warmer and you will be able to ride without freezing longer

Sometimes, when choosing, some people do not pay attention to the fact that wetsuits can be used for different purposes: for diving, spearfishing, for active water sports such as: kiting, windsurfing, surfing, wake, for triathlon, and for heaps of other water activities. Each of them has its own characteristics: in the material, cut, thickness, seam processing, etc. Wetsuits created not for active sports should not be considered for purchase for the sake of economy, or, for example, because of their greater thickness. For example, in a thick diving suit you will be extremely uncomfortable to move/curl up.

The wetsuit should fit snugly like a second skin, without wrinkles, but should be comfortable to move around in. A loose-fitting wetsuit makes it easier for you to freeze. As a rule, putting on a new wetsuit is a separate story, as it is completely new and unstretched. After several uses, it will be much easier to get into it, and after a season or several (depending on how often you use it) it can stretch significantly.

Choosing the right size for a suit is not difficult. Each manufacturer has a size chart, you just need to measure your parameters and check with it.

TYPES OF LIGHTNING ON WETSUIT

The back zip is the most common option and the easiest to put on, but it doesn't have the best protection against water ingress. It is usually used on inexpensive and simpler wetsuits, although it can also be found on expensive ones, but in addition to the zipper, valves or collars are placed on the back to protect against water ingress.

zipper on the chest or no zipper at all - it's more difficult to put on such a suit (although it's a matter of habit), but much less water passes through such a zipper. Most often it can be found on wetsuits in the middle price range or on expensive models. Much less water permeability compared to back zip.

THICKNESS OF NEOPRENE AND A LITTLE ABOUT IT

A wetsuit is a special clothing designed for some water sports, including spearfishing. The purpose of using underwater equipment is thermal insulation, reducing the risk of injury and reducing the negative impact on the body of the aquatic environment.

When the owner of the underwater equipment is warm and comfortable, such a hunt can last for hours and bring not only results, but also pleasure from the process. How to choose the right wetsuit for spearfishing is a question that everyone who wants to succeed in spearfishing should know the answer to. Well-chosen equipment allows a person to achieve maximum performance.

Main selection criteria and types of wetsuits

Different conditions and water temperatures lead to the availability of a large number of different types of wetsuits and other equipment on the market. Here are the main types of wetsuits and describe what circumstances of their use are optimal.

Drysuits

Nylon fabric is used for the manufacture of dry suits. Usually such equipment consists of overalls or from hermetically glued trousers and a jacket. Also "water" clothing includes boots and glued-on gloves.

The diving suit is equipped with a fitting that allows you to create a connection with a scuba regulator. Several etching valves are an integral part of such a suit.

The main disadvantages of this type of equipment are their high cost and bulkiness. However, some people successfully use such "outfits" in fish hunting in shallow water.

Semi-dry wetsuits

The material used for the manufacture of semi-dry wetsuits is neoprene or microporous rubber. Sealing (obturation) of the suit prevents the penetration of liquid under the hunter's clothes. There is a zip fastener on the chest and back.

Kitesurfing wetsuit How to choose?

A wetsuit is an essential part of any kiter's wardrobe. They are different: long, short, with a thickness of 0.5 to 6 mm, but we will focus on the most relevant, long wetsuit. So how to choose it, what you need to know and what features to take into account? Let's try to put everything on the shelves :)

Wetsuit Types

Kiting wetsuits are: Dry and Wet.

Dry. A jumpsuit with sealed cuffs on the sleeves and legs (there are also not only cuffs on the legs, but also socks) that do not allow water to pass through. This option is chosen by those who ride in harsh conditions.

So, the bulk of wetsuits are wet, i. water gets into the wetsuit. In order not to freeze in such a wetsuit, the following points must be taken into account: the correct size, processing of seams, elasticity of neoprene, how the zipper is made, and where it is located, since the less water gets inside, the less it will circulate there, and therefore you will be warmer and you will be able to ride without freezing longer.

Sometimes, when choosing, some people do not pay attention to the fact that wetsuits can be used for different purposes: for diving, spearfishing, for active water sports such as: kiting, windsurfing, surfing, wake, for triathlon, and for heaps of other water activities. Each of them has its own characteristics: in the material, cut, thickness, seam processing, etc. Wetsuits created not for active sports should not be considered for purchase for the sake of economy, or, for example, because of their greater thickness. For example, in a thick diving suit you will be extremely uncomfortable to move/curl up.

The wetsuit should fit snugly like a second skin, without wrinkles, but should be comfortable to move around in. A loose-fitting wetsuit makes it easier for you to freeze. As a rule, putting on a new wetsuit is a separate story, as it is completely new and unstretched. After several uses, it will be much easier to get into it, and after a season or several (depending on how often you use it) it can stretch significantly.

Choosing the right size for a suit is not difficult. Each manufacturer has a size chart, you just need to measure your parameters and check with it.

Types of zippers on wetsuits

The back zip is the most common option and the easiest to put on, but it doesn't have the best protection against water ingress. It is usually used on inexpensive and simpler wetsuits, although it can also be found on expensive ones, but in addition to the zipper, valves or collars are placed on the back to protect against water ingress.

zipper on the chest or no zipper at all - it's more difficult to put on such a suit (although it's a matter of habit), but much less water passes through such a zipper. Most often it can be found on wetsuits in the middle price range or on expensive models. Much less water permeability compared to back zip.

Neoprene thickness and a little about it

It is impossible to practice underwater hunting without special clothing, namely a wetsuit. Such equipment is necessary for a person to feel as comfortable as possible under water. It protects the body from the effects of the aquatic environment, from mechanical damage in contact with various sharp and hard objects, and provides thermal insulation.

The success of spearfishing depends on how correctly the wetsuit is chosen. If its owner is warm and comfortable, he can spend hours under water, reaching high physical indicators. How to choose a wetsuit for spearfishing we will understand in this article.

Wetsuit Types

There are three main categories of special clothing that spearfishers use. They are designed for different conditions, including temperature, therefore, when making a choice in favor of this or that product, it is necessary to clearly understand where and how it will be used. So, what are wetsuits:

    Dry. From the name alone it is clear that suits of this class are hermetically sealed, that is, they isolate the hunter's body from water. This effect is achieved thanks to the sealing cuffs (seals) on the wrists and in the neck area, as well as waterproof zippers.

    Previously, a dry suit for spearfishing was a composite one. The upper part (jacket) and the lower part (trousers) were connected to each other, and the joints were sealed in different ways: using waterproof glue, a rubber belt and others. Now it is a completely sealed overalls, equipped with a fitting for connecting to an aqualung and a valve for air release. The diver regulates the amount of air inside with a bleed valve, thereby changing the depth of the dive.

    Modern dry suits for spearfishing are made from neoprene or three-layer trilaminate, and each of these materials has its own pros and cons. The neoprene spearfishing suit is more elastic, warmer, it fits the body perfectly, it almost never has wrinkles. But it takes too long to dry.

    Trilaminate has its drawbacks. For example, it doesn't stretch well. If the trick is to gain a little weight, and his movements will be constrained. It is especially difficult in such clothes to bend down to put on fins. And this material, as experienced tricks assure, can flow at the seams already in the first season, which is much more difficult to glue than neoprene.

    Today, underwater hunters rarely use dry suits, mostly only in the cold season. There are several reasons for this. This is their excessive bulkiness, high price and the need to buy diving underwear. Wetsuits of this type are not used without it. Semi-dry. This is an intermediate class of underwater swimwear. Water can penetrate under such a suit, but in a small amount. With a snug fit to the body in the undersuit space, it is almost absent, therefore the heat-insulating properties of such a product are considered to be quite high. Double wrist cuffs, ankle and cervical cuffs are responsible for sealing in it. In addition, suits of this class are equipped with sealed zippers, which in most models are located on the chest and back. All of these elements were developed solely for the sake of one thing - heat preservation.

    Semi-dry wetsuits are most often made from neoprene with a thickness of 5-7 mm, less often from microporous rubber. At great depths, under water pressure, neoprene contracts, which negatively affects thermal protection and buoyancy. In addition, this material cannot be called wear-resistant, with intensive use it serves for a relatively short time. This is explained by the fact that foamed neoprene rubber quickly "gets tired" from constant compression. The maximum service life of such a suit is 5 years.

    Almost all semi-dry suits are made of double-sided rubber and equipped with hard zippers. All this impedes the movement of the underwater hunter. In the process of hunting, he has to make a lot of physical efforts, as a result of which fatigue sets in faster. Wet. One of the most popular options today. Such suits are called wet for their ability to pass water in and hold it. Under the cloth, it heats up from the body and hardly mixes with the cold water outside. Of course, it is difficult to call it an effective thermal insulator, so choose a wet wetsuit of such a size that it fits as tightly as possible. The degree of circulation depends on the density. The less water gets inside, the less heat will be spent to heat it up.

    Wet wetsuits are used with tricks throughout the warm season, almost until the freeze-up. Depending on the thickness, you can hunt in them even at low water temperatures, starting from 3-4 degrees.

    The material for their manufacture is the same neoprene, the thickness of which ranges from 1.5-9 mm. The thicker the suit, the warmer it is, but at the same time the elasticity of the clothes suffers, and with this the mobility of the hunter. The inside of this class of wetsuits is most often trimmed with nylon. Between it and the top layer there is a heat-reflecting insert that helps to retain heat.

Popular posts
Hiking knife

The category of "survival knives" is very popular with manufacturers. As a rule, these are hefty crowbars, which in antiquity would have passed for swords. Heavy, powerful and not killed, well, the same uncomfortable. But they are very charismatic and pleasing to their owner. But there is a knife that was actually created as a survival knife for the Swedish Air Force pilots. This knife fit into the concept existing in

  • . 22 minutes
Life in Norway through the eyes of Russian-speaking immigrants

Norway - want to go there? The best trekking in Norway: detailed route description, trekking plan and other useful information.

  • . 13 minutes
We use cookies
We Use Cookies to Ensure That We Give You The Best Experience on Our Website. By Using The Website You Agree to Our Use of Cookies.
ALLOW COOKIES.